Publicité
Les langues disponibles
Les langues disponibles
10 electrolux
Problem
Replacing the bulb
If you want to replace the bulb, do these
steps:
1. Break the circuit of the appliance.
2. Press on the rear hook and at the same
time slide the cover in the direction of the
arrow.
3. Replace the bulb with one of the same
power (the maximum power is shown on
the light bulb cover)
4. Replace the light cover by sliding it into its
original position.
5. Reconnect the appliance.
6. Open the door and check if the light
comes on.
Technical data
Dimension of the recess
Rising Time
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.
Installation
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
All manuals and user guides at all-guides.com
Possible cause
Plug is not connected to the
mains socket properly
Power does not reach the appli-
ance
There is no voltage in the mains
socket (try to connect another
appliance into it)
Height
Width
Depth
Connect the mains plug properly
Try connecting another electrical
device to the power outlet
Call an electrician
1780 mm
560 mm
550 mm
13 h
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
Solution
Publicité
