Tivoli Audio NetWorks Manuel D'utilisation page 10

English
6. SELECT/MENU: Press briefly to select the item highlighted in the menu with an arrow, or
press and hold to enter the main menu.
7. MUTE/SNOOZE: Press to mute the audio (an icon of a speaker with a line through it will show
on the display) when the unit is playing and press again to restore sound or adjust the volume.
Press to mute the alarm for 7 minutes after the alarm sounds. The alarm will re-sound after
7 minutes. During Snooze, a count down will be shown on the display except when the analog
clock face is displayed. The Snooze time is not adjustable.
8. PRESETS #1-5/music player controls: Your NetWorks has five Internet radio stations already
saved to the presets for you to enjoy. Should you wish to replace them with your own selec-
tions, press and hold a preset button to save the currently tuned station to a preset. "Preset
Saved" will briefly show on the display. Once stored, press the preset button briefly to recall
the station associated with that preset. If no station has been stored and the preset button is
pressed, the display will show "Preset Empty". Presets cannot be stored in Music Player mode.
9. INFO: In Internet radio mode, the Info button will cycle through current status ("Playing" or
"Station unavailable"), audio format, station description, genre, and station location. Each
time a station is tuned the Info category will default to current playing status. Other Info
categories are available when playing Podcasts. When playing Podcasts, the Info button will
cycle through Episode name, Description, Show description, Genre, and Location.
In Music Player mode, for Shared Media, the Info button will cycle through artist, song, album,
and format, and track time. For Shared Folders and a USB device, the Info button will cycle
between filename, path, and format.
10. SLEEP: Press to start the 20 minute sleep timer. The NetWorks will display the remaining
sleep time and automatically power off after 20 minutes. Press again to cancel the sleep
timer. The amount of sleep time is not adjustable.
11. ALARM: Press to access the alarm menu with the NetWorks on or off. For more see "How to
set the Alarm".
The sensor for the remote control is positioned in the lower left corner of the front panel display.
When using the remote, aim it in this general direction. Sunlight flooding the sensor can sometimes
cause erratic behavior.
When replacing the remote's battery, use a brand name 3V lithium button cell, model number
CR2025. Install the battery so the positive side is facing you. Dispose of the spent battery
according to your country's regulations. Do not incinerate.
When using the remote control within close proximity to the front panel remote sensor, you might
notice some flashing of the display. This is normal.
10
All manuals and user guides at all-guides.com