Know Your Compound Miter Saw - Delta ShopMaster S26-260L Mode D'emploi

A. Motor
B. Fence
C. Throat Plate
D. Miter Lock
E. Miter Control Arm
F. Miter Gauge with Positive Stops
G. Horizontal Work Clamp
H. Base
I. Mounting Holes
J. On-Board Wrench
K. Work Table
L. Bevel Lock
M. Dust Bag
N. Upper and Lower Blade Guards
O. Blade (not visible)
P. Trigger Switch
Q. Spindle Lock
R. Electric Brake (not shown)
S. Laser Guide (not shown)

KNOW YOUR COMPOUND MITER SAW

Refer to Figure 1.
Using this tool safely requires that you understand the
information provided in this operator's manual, as well as
the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety
rules.
A. 15-AMP MOTOR: This tool features a powerful
15-amp motor with all ball bearings and externally
accessible brushes for ease of servicing.
B. FENCE: The miter fence supports the workpiece when
making all cuts.
C. THROAT PLATE: The throat plate supports the
workpiece and provides a safe working surface.
D. MITER LOCK: The miter lock handle securely locks
the saw at desired miter angles.
E. MITER CONTROL ARM: Is mounted to the Work Table
and provides a stable connection in order to pivot the
Work Table at the desired miter angle.
F. MITER GAUGE WITH POSITIVE STOPS: Positive
stops have been provided at 0°, 15°, 22-1/2°, 31.6°,
and 45°. The positive stops have been provided on
both the left and right side of the miter table.
FEATURES
J
K
G
I
x4
D
G. HORIZONTAL WORK CLAMP: The horizontal work
clamp helps to position and secure the workpiece to
the fence, ensuring safer operation and more accurate
cuts.
H. BASE: Supports the tool and features mounting holes.
I. MOUNTING HOLES: Enable you to securely mount
the tool to a stable surface.
J. BLADE WRENCH STORAGE: The included blade
wrench features a Phillips screwdriver at one end and
a hex key at the other. Use the hex key when installing
or removing blade and the Phillips screwdriver when
removing or loosening screws. When not in use, the
wrench can be stored in the base of the saw.
K. WORK TABLE: The die-cast aluminum work table
provides a level and sturdy work surface.
L. BEVEL LOCK: The bevel lock secures the saw at the
desired angle for bevel cuts. There are positive stop
screws on each side of the saw arm for making fine
adjustments at 0° and 45°.
M. DUST COLLECTION BAG: The included dust bag
attaches and detaches quickly with the integrated
clamp for easy cleaning.
7
N Q P
O
C H
F
FIGURE 1
M
A
L
B