Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE (continued)
REPLACING THE LED LIGHT BULBS (
CAUTION: LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the
one already used. Make sure all the control switches are off and the hood is unplugged or that the
breaker is OFF.
STEPS
:
• This range hood uses LED light fixture: 3W Max 12V LED
• Make sure the range hood is unplugged or turn OFF the breaker. Make sure the lights are cool to touch.
• Place a flat-head screwdriver between the light housing and the hood body, gently pry up the light
housing and search for the metal clip.
• Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and
discard the used light fixture.
• Reverse the steps to install a new LED light fixture. Turn the breaker or hood ON to test for operation.
CONTINUED)
16
Publicité
