Publicité
Les langues disponibles
Les langues disponibles
Disassembly and assembly the lamp of lower zone
Instructions:
1. Use a screwdriver to remove the two tapping screws from the view (1).
2. Remove the entire LED lamp panel (3) and lampshade (2) components directly.
3. The entire lampshade component can be placed on the countertop (with a scratch
resistant pad). Use a screwdriver to remove the two screws (4) that secure the
lamp panel, take out the old lamp panel, replace it with a new one and then fix
the two screws (4) that were just removed. Last, install the entire lampshade
component back to the corresponding position of the lampshade in the partition
plate(5).
（5）
（1）
（4）
（3）
（2）
EN-20
Publicité
