Publicité
Les langues disponibles
Les langues disponibles
Zone switch
Press the key to switch between upper zone and lower zone for choosing which
zone to set temperature. Press the key once, the LED display in chosen zone
flash regularly. Press up and down key to set temperature. Press the key again;
switch th e zone to set temperature.
UP
Press the key once, LED Display in regular flash showing curren tset
temperature.Continue pressing to adjust set temperature, one press increase 1℃.
Regular flash quit after 5 seconds detecting no press and newset
temperature save. LED display return to show actual temperature inside.
Down
Press the key once, LED Display in regular flash showing curret set
temperature. Continue pressing to adjust set temperature, one press reduce 1℃.
Regular flash quit after 5 seconds detecting no press and new set temperature
save. LED display return to show actual temperature inside.
ChildLock（Combination key）
1.Lock：Press both keys at the same time for 3 seconds to lock.
2.Unlock: Press both keys at the same time for 3 seconds to unlock.
Fahrenheit/Celsius display interchange
Switch temperature display between Fahrenheit and Celsius by pressing and holding
the key for 2 seconds.
Attention
1.The ex-factory temperature of this product is12 ℃
temperature range needs to be set according to the actual wine.
2.For both upper and lower zone, the cooling temperature could be set from5℃-22℃.
But lower zone temperature will equal to or be higher than upper zone.
3.Alarm sound: when the system malfunction occur and alarm sound, press any
key on the control panel to cancel the alarm sound.
4.Errorcode
:
When the temperature sensor of upper zone failure occur, error code displays:
E1 for
open circuit ; E2 for short circuit.
When the temperature sensor of lower zone failure occur, error code displays:
E5 for open circuit; E6 for short circuit.
, and the corresponding
EN-17
Publicité
