Signature CUVEE S31N Manuel D'utilisation page 46

①Door hinge cover
② Flange screw
③ Door hinge
Cap
④
2.Handle installation
3.Reversing the door
Our wine coolers are delivered with the door opening from left to right. To reverse the
opening direction:
1)Close the door.
2)Take off the door hinge cover
① on the up right corner; Unscrew the flange screws ② ;Take off door hinge③ ;
Remove the up left side cap④.
3)Lift the door up until the door gets off the lower
door hinge ⑤ .
4)Unscrew the lower door hinge. Remove the short
cabinet foot⑥ and height cabinet foot⑦.
⑤ Lower door hinge
⑥Short cabinet foot
⑦Height cabinet foot
Handle screw
8
Handle
9
4
Housing
EN-14
3
2
4
1
1
2
3
Door
5