Publicité
Les langues disponibles
Les langues disponibles
Step 2: Remove the Battery
You can quickly and easily remove the Battery from your Mower.
1. Open the Battery Cover (Figure 2).
TIP
Press down on the Mower body next to the Battery Cover Handle before pulling the Cover open.
2. Turn the Battery Retainer Arm until it is no longer blocking the Battery (Figure 3).
To help keep the Mower from rolling while removing the Battery, put one foot behind a wheel for
TIP
stability.
3. Pull the Battery straight up and remove it.
Figure 2
Step 3: Charge the Battery before Your First Use
You MUST charge the Battery for twelve (12) hours before you use the Mower for the first time. If you
do not charge it before using the Mower, the Battery's charging capacity may decrease.
For instructions on removing and charging the Battery, read "Chapter 5: Charging and Caring for the
Battery" before you operate the Mower.
Step 4: Attach the Lower Handlebar Sections
TIP
To keep the Mower from moving while you assemble it, place your foot behind one of the wheels.
NOTE: You will use the green Quick-Connect Knobs to attach the Lower Handlebar sections to the Mower.
Install both handlebars the same way.
1. Set the Cutting Height Lever (Figure 4) to the highest adjustment (position 6 as molded into the
Mower body). This makes it easier to reach the slots on the Mower frame.
Cutting Height Lever
(in position 6)
12
All manuals and user guides at all-guides.com
Figure 4
Retainer Arm
Figure 3
NOTE: The position numbers are high
lighted in this photo for clarity.
1-866-NEUTON1 (638-8661) www.neutonowners.com
Publicité
