Neuton CE 5.2 Consignes De Sécurité Et D'utilisation page 22

Step 8: Insert the Battery after Being Fully Charged
1. Orient the Battery as shown in Figure 21a. Align the black side of the Battery with the side of the
Mower housing where the label reads "Insert Battery with the black side along this edge."
NOTE: The indentations on the bottom of the Battery must line up with the metal tabs in the bottom the
Battery compartment.
2. After confirming the correct orientation of the Battery, insert the Battery fully into the Battery
compartment.
3. Turn the Battery Retainer Arm back over on top of the Battery to secure it in place (Figure 21b).
IF THE BATTERY IS NOT ORIENTED CORRECTLY, IT WILL NOT FULLY DEPRESS INTO THE OPENING. IF THIS
HAPPENS, REMOVE THE BATTERY, RECHECK THE ORIENTATION, AND TRY AGAIN.
Figure 21a
18
All manuals and user guides at all-guides.com
Label
Figure 21b
1-866-NEUTON1 (638-8661) www.neutonowners.com
Retainer Arm