Publicité
Les langues disponibles
Les langues disponibles
You can give an echo effect to the sound from a connected microphone (MIC) by adjusting
the ECHO knob.
ECHO
If you turn clockwise, the echo effect goes up, and if you turn counter-clockwise, the echo
effect goes down.
Use the VOL knob to adjust the volume of a connected microphone (MIC).
VOL
If you turn clockwise, the volume goes up, and if you turn counter-clockwise, the volume
goes down.
MIC
Connect your microphone to the MIC jack.
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main
GROUP
unit to Audio In on an external analogue output device.
PLAY OUT
Terminals
Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to
Audio Out on an external analogue output device.
AUX2/
GROUP
PLAY IN
Terminals
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio
Out on an external device.
AUX1
Connect the power cord to the Power jack and connect the other end of the power cord to
Power
a wall socket to supply electrical power to the Sound Tower.
• Be sure to match connector colours.
• If the external analogue output device has only one Audio In jack, connect either left or
right.
• Be sure to match connector colours.
• If the external analogue output device has only one Audio Out jack, connect either left
or right.
• Press the
(Source) button to select AUX2.
• If the product is in AUX2 mode with no playback and no command input for more than
20 minutes, the system will turn off.
• If the product is in AUX2 mode with playback for more than 8 hours and no command
input, the system will turn off.
• If the product is in AUX1 mode with no playback and no command input for more than
20 minutes, the system will turn off.
• If the product is in AUX1 mode with playback for more than 8 hours and no command
input, the system will turn off.
ENG - 5
Publicité
