SKF TMHP 15 Mode D'emploi page 6

1. Description
The SKF self-centring hydraulic pullers are specially
designed for extracting large bearings and other
components. To attain the high forces that
then normally are needed, these pullers are
equipped with a hydraulic jack and supplied with
SKF hydraulic pump TMJL 100.
2. Technical data
Description
No. of arms
Width of grip
Effective arm length
Claw length
Claw height
Piston displacement
Max. pressure
Max. force
Weight (without pump*)
Description
No. of arms
Width of grip
Effective arm length
Claw length
Claw height
Piston displacement
Max. pressure
Max. force
Weight (without pump*)
Description
No. of arms
Width of grip
Effective arm length
Claw length
Claw height
Piston displacement
Max. pressure
Max. force
Weight (without pump*)
Description
*Weight of Hydraulic pump
4
EN
TMHP 15/260
3
195–386 mm (7.7–15.2 in)
264 mm (10.4 in)
37 mm (1.5 in)
30 mm (1.2 in)
100 mm (3.9 in)
80 MPa (11 600 psi)
150 kN (17 US ton)
31 kg (68 lb)
TMHP 30/170
3
290–500 mm (11.4–19.7 in)
170 mm (6.7 in)
30 mm (1.2 in)
35 mm (1.4 in)
50 mm (2.0 in)
80 MPa (11 600 psi)
300 kN (34 US ton)
49 kg (108 lb)
TMHP 50/140
3
310–506 mm (12.2–19.9 in)
140 mm (5.5 in)
32 mm (1.2 in)
40 mm (1.6 in)
40 mm (1.6 in)
80 MPa (11 600 psi)
500 kN (56 US ton)
59.5 kg (131 lb)
TMJL 100
7 kg (15.4 lb)
TMHP 30/350
3
290–500 mm (11.4–19.7 in)
350 mm (13.7 in)
30 mm (1.2 in)
35 mm (1.4 in)
50 mm (2.0 in)
80 MPa (11 600 psi)
300 kN (34 US ton)
53.5 kg (118 lb)
TMHP 50/320
3
310–506 mm (12.2–19.9 in)
320 mm (12.6 in)
32 mm (1.2 in)
40 mm (1.6 in)
40 mm (1.6 in)
80 MPa (11 600 psi)
500 kN (56 US ton)
65 kg (143 lb)
TMHP 30/600
3
290–500 mm (11.4–19.7 in)
600 mm (23.6 in)
30 mm (1.2 in)
35 mm (1.4 in)
50 mm (2.0 in)
80 MPa (11 600 psi)
300 kN (34 US ton)
58 kg (128 lb)
TMHP 50/570
3
310–506 mm (12.2–19.9 in)
570 mm (22.4 in)
32 mm (1.2 in)
40 mm (1.6 in)
40 mm (1.6 in)
80 MPa (11 600 psi)
500 kN (56 US ton)
72 kg (159 lb)