Silva Exceed X Mode D'emploi page 2

FULL VERSION MANUAL
exceed
Thank you for choosing SILVA Exceed headlamp. This headlamp can,
thanks to the modular design, also be used on a helmet or a bike
handle bar.
The Exceed headlamp is equipped with Intelligent Light® which is a
light distribution technology that combines a wide angle flood light
with a long reach spot light. This unique light image gives the user
peripheral and long distance vision at the same time. For a runner,
cross country skier, mountain biker or night orienteer this translates
into less head movement, increased control, better balance and
more speed.
SILVA ACTIVITY LIGHT
Exceed features an activity based light beam. With this feature you
can optimize the light beam according to the specific sport that you
are performing. With just a few clicks of a button you can control the
3 preset light modes, which adapt the light's characteristics to bi-
king, skiing or running. Within these modes, you can also set varying
strength of the light output. Combined with the SILVA multi attach-
ment options, this feature gives you a more intense experience and
developed skills, whether you are Biking, XC-skiing or Trail Running.
PRODUCT OVERVIEW
The Exceed headlamp contains the following parts:
• Headlamp unit
• Ergonomic head set.
• Rechargeable Li-Ion battery with a multi attachment battery
case
• Extension cord
• Helmet attachment
• Bike handle bar attachment
• Quick guide
• Storing case
• USB charging cable
• USB charger (Exceed XT only)
BEFORE USE
BATTERY CHARGING
The battery needs to be charged before first use.
1. Connect the battery to the charger or other USB port with the
included cable.
2. Connect the charger to the wall outlet.
3. On the battery there is an LED showing the battery status during
charging:
- green light = battery is fully charged
- red light = battery is charging
- blinking red light = battery is not working properly or needs
charging
Note! When the battery is fully charged the charger automatically
switches to maintenance mode.
Exceed headlamp is compatible with all SILVA batteries with the
same connector as on Exceed battery. Note that the battery indica-
tion may not be accurate with other SILVA batteries.
SILVA EXCEED – THE FLEXIBLE, MODULAR HEAD-
LAMP
The Exceed headlamp is designed for Multi-Activity Sports. Here is a
description of the different options:
ERGONOMIC HEAD SET
The head set is ergonomically shaped to give comfortable fit. Use
the 2 buckle adjustments to fit it perfectly to your head. Removable
top band included.
Attach the headlamp in the head bracket by simply sliding the head-
lamp foot into the snap-in socket.
To remove, simply slide the headlamp up and out of the bracket.
BIKE HANDLE BAR ATTACHMENT
The bike handle bar attachment is developed for use on bike handle-
bars with a dimension between 22 mm and 32 mm. The bike bracket
is attached to the handle bar simply by wrapping the rubber strap
around the handlebar and
fasten it on the plastic hook.
Attach the headlamp in the bike handle bar attachment by simply
sliding the headlamp bracket into the snap-in socket.
To remove, simply slide the headlamp up and out of the bracket.
All manuals and user guides at all-guides.com
Art.no Exceed X: 37441
Art.no Exceed XT: 37407
HELMET ATTACHMENT
The helmet attachment comes with pre mounted adhesive tape on
the back for easy mounting on any helmet.
To mount the helmet attachment, remove the protective film cove-
ring the adhesive tape. Make sure the surface of the helmet is clean
and dry. Press the bracket onto its correct position.
If you do not want to use the adhesive on your helmet the attachment
is prepared for mounting with 2 or more straps on the sides. (Not
included)
Attach the headlamp in the helmet attachment by simply sliding the
headlamp bracket into the snap-in socket.
To remove, simply slide the headlamp up and out of the bracket.
FLEXIBLE BATTERY CARRYING
The Exceed headlamp is designed so that the battery can be carried
in multiple ways; for example in a battery carrier on your back, on
the bike frame, on your belt, backpack or on the back of your head
unit etc.
DURING USE
SWITCH ON YOUR HEADLAMP
On the side of the headlamp body there is a double action push but-
ton which controls all 3 Activity lights, 2 light levels in every activity
and search mode. The double action push button work so that you
can activate different modes on Exceed depending on if you press
soft or hard on the button.
1. To start the lamp:
Short press, soft or hard
2. To switch between the activities, Bike, X-ski and Run:
Short hard press
The activities is by the following order:
Bike, XC-Ski, Run, Blink, Starts over from Bike
3. To switch between max and min light level
Short Soft press
Independently of what activity you are in you can always change
light level
4. To activate Search mode
Long Soft press
After 5 sec the lamp will automatically switch back to your
previous mode.
When trying to activate search mode repeatedly the temperature
control will temporarily shut of the functionality until the lamp is
cooled down again.
5. To turn off your lamp
Long hard press
TEMPERATURE CONTROL
Note that the headlamp body temperature will increase during use.
The headlamp temperature is depending on light mode, ambient air
temperature and the airflow (speed). The Exceed headlamp is equip-
ped with a temperature control unit that prevents the headlamp
body from overheating by reducing the power to the LEDs.
Note! Always make sure to disconnect the battery when the head-
lamp is stored in a closed compartment such as in a bag, pocket or
similar.
LOW BATTERY WARNING
During operation of the headlamp there will be a low battery war-
ning when 25% of the battery time remains. This is done by flashing
LEDs for 1 second and repeated again after 5 seconds.
RESERVE MODE
During operation the lamp will go into reserve mode when there is
15% power left of the battery. Reserve mode means less light than in
power save mode but enough light to see the path in front of you. All
LEDs will flash once before the lamp goes into this mode. From this
point only reserve mode and flash mode is available to prevent the
user from being left with no light in the dark.
BATTERY STATUS INDICATION
When the headlamp is turned off a small LED is turned on inside the
front of the headlamp to indicate the status of the batteries. This
indication will be on for 5 seconds. Please note that this indication is
valid for the included battery only.
Green light – Battery in good condition
Red – Battery in poor condition
Visit: www.silva/enviroment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.