Spin Master Air Hogs Zero Gravity Nano Wall Climber Mode D'emploi page 3

DRIVING ON WALLS OR UPSIDE DOWN
To drive on walls and upside down you must have switch positioned
to the left ( under "W" . )
NOTE: Avoid driving overhead when other people are
around. Do not stand underneath when driving overhead.
DRIVING ON THE GROUND
To drive on ground you must have the switch positioned in the
middle ( under "G " . )
The fan will not turn ON, but the headlights will turn on and
the vehicle will drive full function on the ground. (The ground
mode saves the battery charge).
F
B
When finished playing with your Zero Gravity Nano™, remove vehicle from wall Turn vehicle OFF,
and Turn the controller OFF. NOTE: The trim setting will reset when the vehicle and controller are turned off.
All manuals and user guides at all-guides.com
TRIM ADJUSTMENT
3
The fabric air skirts can be adjusted out ward at a 45° angle
to ensure a proper wall suction.
IMPORTANT: The Zero Gravity Nano™ should only be
driven on a smooth, clean, flat surface. Dirt or debris can
get inside the fan and cause damage.
A
R
L
R R
If the vehicle turns to the LEFT, press the Right trim button
until it drives straight (A).
If the vehicle turns to the RIGHT, press the Left trim button
until it drives straight (B).
B
L
R
L R L R