ROBLIN ORELIA S Manuel D'instructions page 19

MAINTENANCE
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
The filters must be cleaned every 2 months of oper-
ation, or more frequently with heavy usage, and can
be washed in a dishwasher..
• Remove the filters by releasing the fixing hooks.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the
handle is visible on the outside.
This filter is not washable and cannot be regener-
ated, and must be replaced approximately every
four months of operation, or more frequently with
heavy usage.
• Remove the metal grease filters.
• Remove the saturated activated carbon filter by
releasing the fixing hooks.
• Fit the new filter by hooking it into its seating.
• Replace the metal grease filters.
20 W halogen light
• Remove the 2 Screws fixing the Lighting
support, and pull it out of from the Hood.
• Extract the Lamp from the Support.
• Replace with another of the same type, making
sure that the two pins are properly inserted in
the lamp holder socket holes.
• Replace the Support, fixing it in place with the
2 Screws removed as above.
19
All manuals and user guides at all-guides.com
Grease filters
Odour filter (Recirculation version)
REPLACING THE ACTIVATED CARBON FILTER
Lighting
LIGHT REPLACEMENT
GB