ROBLIN ORELIA S Manuel D'instructions page 17

• Push fit connection 15 onto the air outlet.
• Insert the connection extension pieces laterally 14.1
in connection 15.
• Make sure that the outlet of the extension pieces 14.1
is horizontally and vertically aligned with the
chimney outlets.
• If this is not the case, adjust the position by either
reversing the connection extension pieces 14.1 or by
pushing connector 15 all the way in.
• Ensure that the activated charcoal filters have been
inserted.
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
Upper exhaust flue
• Slightly widen the two sides of the upper
flue and hook them behind the brackets
7.2.1, making sure that they are well seated.
• Secure the sides to the brackets using the 4
screws 12e (2,9 x 9,5) supplied.
Lower exhaust flue
• Slightly widen the two sides of the flue and
hook them between the upper flue and the
wall, making sure that they are well seated.
• Fix the lower part laterally to the hood body
using the 2 screws 12e (2,9 x 9,5) supplied.
17
All manuals and user guides at all-guides.com
RECIRCULATION VERSION AIR OUTLET
ELECTRICAL CONNECTION
Flue assembly
2
2.1
2.2
15 14.1
7.2.1
12e
12e
GB