ROBLIN ORELIA S Manuel D'instructions page 16

• Before attaching the hood body, tighten the
two screws Vr located on the hood body
mounting points
• Hook the hood body onto the screws 12r
(4,2 x 12,7).
• Fully tighten support screws 12r (4,2 x
12,7).
• Adjust screws Vr to level the hood body
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid
pipe ø 150 or 120 mm, the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection,
insert the reducer flange 9 on the hood body
outlet.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
GB
All manuals and user guides at all-guides.com
Mounting the hood body
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
12r
ø 150
Vr
ø 120
9
16