Télécharger Imprimer la page

Siemens SL34A Guide D'utilisation Et D'entretien page 19

Publicité

Figure 6/Ilus. 6
Figure 7/Ilus. 7
Figure 8/Ilus. 8
Figure 9/Ilus. 9
Figure 10/Ilus. 10
18
Operation | Fonctionnement | Operación
(Loading the Upper Rack, continued)
Note: When pushing the upper rack into the
dishwasher, push it until it stops against the
back of the tub; otherwise the upper spray
arm may not connect to the water supply.
Depending on the model dishwasher you
have, the upper rack may have features
and accessories that will add to its loading
versatility. These features and accessories
include height adjustments and fold-down
flip tines and cup shelves. Check with the
Model Features Chart on page 6 in this
manual to find out which features or
accessories your dishwasher has.
The upper rack of of Siemens dishwash-
ers is adjustable in one of two ways: 1) the
Standard Upper Rack Adjustment, or 2) the
RackMatic™ Adjustment. Look to the Model
Features Chart on page 6 in this manual to
verify which feature your dishwasher has
before you attempt the adjustment.
Using the Standard Upper Rack
Adjustment
1) Remove the empty upper rack by
pulling it out of the dishwasher to the
point that it can be lifted upward, as
shown in Figure 6.
2) Pull the rack outward and up until the
rollers are completely free of the roller
guides.
3) Re-insert the rack with the other set of
rollers on the roller guides, as shown in
Figure 7.
Using the RackMatic      Adjustment
To lower the upper rack:
1) Pull the upper rack out of the
dishwasher until it stops rolling.
2) Grasp the rack as shown in Figure 8.
3) Press the RackMatic™ handles inward,
as shown in Figure 9, and let the rack
drop gently while supporting it with your
hands.
To raise the upper rack:
4) Pull the upper rack out of the
dishwasher until it stops rolling.
5) You do not need to press the
RackMatic™ handles to raise the rack.
Grasp the upper rack by the upper edge
and gently pull it upward, as shown in
Figure 10, until the RackMatic™ handles
lock the rack into position.
6) Before you push the upper rack back
into the dishwasher, ensure that the
rack height is the same on both sides.
Otherwise, the dishwasher door will not
close and the upper spray arm will not
connect to the water circuit.
E n g l i s h

Publicité

loading

Ce manuel est également adapté pour:

Sl84aSl95a