Publicité
Les langues disponibles
Les langues disponibles
10. TROUBLESHOOTING GUIDE
10.2 Malfunction indications appearing on the display
Display message
Power Failure
Door open
Upper or lower zone
too warm
Upper or lower zone
too cold
Error Code...
Check condenser
>
In case of errors, touch the button Alarm
number code.
>
The message will be shown for 3 seconds, then it will go back to the home
>
For blocking the message on the screen, press on the display, the button info
the screen for 30 seconds, then it will go back to the home screen.
>
In the case there is more than one error message, the dispay will show in time sequence the different
error messages.
32
Malfunction description
Prolonged interruption of electrical power
The appliance starts up again automatically and indicates
the highest recorded temperatures.
Door open
this message appears few minutes from the door opening.
See the troubleshooting guide.
Wait 12 hours. If the problem persists, contact Customer Care.
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent may help you solve the problem.
Check Condenser
Every 6 months the display shows the message "Check Cond",
clean the condenser and follow the instructions above about how
to clean the condenser.
and the display will show the error message with its error
screen.
Modalità
(
). The message will be on
Bottle Cooler
On
O
Publicité
