On/Off Switch - Dexter 20VIDV2-180.1 Mode D'emploi

FR FR
6. OPERATION
ES ES
PT PT
1
1. hexagon chuck
IT IT
EL EL
. To switch on the tool, press the on/off switch
PL PL
. To switch off the tool, release the on/off switch
RU RU
KZ UA
Set the Left/right switch to
UA KZ
RO RO
. Change the direction of rotation only when the machine is not in operation !
Caution
. Operating the machine with a low speed for a long time will increase the risk that the motor
BR BR
will be overheated. To prevent overheating, let the motor cool down regularly ( Stop using the
machine for 15 minutes )
EN
EN
CAUTION: Please support and clamp the workpiece properly. Do not use hand to grip or
clamp the workpiece, it may cause injury.
There are three speeds for this machine. Press the round button on the speed display board,
the speed changes accordingly.
The speed display board show:
Light
The first light is on
The second light is on
The thrid ligt is on
204
1
2
1
Left/right switch
shown on the left/righ switch
3 speeds adjustment
Light indicators
3
1
1

On/off switch

1
Set the Left/right switch to
2
1
Status
Speed one: 0-1300/min
Speed two:0-2000/min
Speed three:0-2500/min
2