Dexter 20VIDV2-180.1 Mode D'emploi page 198

FR FR
2. SAFETY INSTRUCTIONS
ES ES
power tool. Do not use a power tool while you are tired or under the influence of
PT PT
drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury.
IT IT
B. Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
EL EL
conditions will reduce personal injuries.
C. Prevent unintentional starting. Ensure the switch is in the off-position before
PL PL
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the
switch on invites accidents.
RU RU
D. Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
UA KZ
E. Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
KZ UA
F. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
RO RO
G. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
BR BR
related hazards.
H. Do not let familiarity gained from frequent use of tools allow you to become
EN
EN
complacent and ignore tool safety principles. A careless action can cause severe injury
within a fraction of a second.
POWER TOOL USE AND CARE
A. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
B. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
C. Disconnect the plug from the power source and/or remove the battery pack,if
detachable from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
D. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
E. Maintain power tools and accessories. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool's
198