Publicité
Les langues disponibles
Les langues disponibles
1b
STEP TWO: Installing the Door Edge Guards
2a
CUT OUT PAPER TEMPLATES ON PAGES 4 & 5. FIT THE NOTCH OF THE
TEMPLATE AROUND DOOR HANDLE. ALIGN TAB FLUSH WITH DOOR
EDGE. TAPE PAPER TEMPLATE TO DOOR.
2b
PART NUMBER:
SOA801P001xx
ISOPRO
ALCOH
***IMPORTANT***
PREP ALL DOOR EDGES
WITH ISOPROPYL
ALCOHOL TO REMOVE ALL
SURFACE WAX
x4
START !!
HOLDING DOOR EDGE GUARD IN PROPER ALIGNMENT WITH ONE HAND,
DIRECTLY & DELIBERATELY PERFORM INITIAL STRIKE AT STRIKE POINT #1.
DATE:
ISSUE:
04-17-17
REV. -
ALIGN TOP EDGE OF DOOR EDGE GUARD WITH
LOWER EDGE OF TEMPLATE ALIGNMENT NOTCH.
ENSURE MALLET HEAD IS
PERPENDICULAR TO THE
EDGE OF THE DOOR.
HOLD MALLET AS SHOWN.
SUBARU OF AMERICA
ROTATE TOWEL
DRY ALL DOOR
AFTER EACH
EDGES
WIPE
RESISTANCE MUST
BE FELT &
"SQUEAKY CLEAN"
SOUND HEARD
WHILE DRYING
SQUEAK
ALIGN
USE SOFT SIDE OF
RUBBER MALLET
ONLY
PAGE
2/5
Publicité
