Publicité
Les langues disponibles
Les langues disponibles
The camera lens can be rotated to straighten up the image.
4
RESET.
When contact with the camera is no longer possible and you can no longer
determine what the IP address or the port number no longer corresponds, you
can externally reset the camera to restore the default factory settings.
At the rear of the camera you'll find a small hole marked 'reset'. Use a pointy
object such as a paperclip to press the button inside this hole.
Press this button while the camera is starting up and keep it depressed for at
least 10 seconds.
The camera can now only be reached via Wi-Fi Direct. Now follow the
registration process, see 2.3.
5
TO INSERT THE SD CARD.
At the side you'll find a slot for inserting a Micro SD card, this card slot sits rather
deep. You might have to use a small screwdriver or tweezers to carefully press
the card until it clicks into the correct position.
Publicité
