Alecto DVC-105IP Mode D'emploi page 37

It might happen that the camera of the smartphone or tablet is not able to read
the QR code. In this case, press 'Cannot use QR code' in the bottom of the
screen. In the field UID, enter the UID code marked on the QR code sticker and
then enter the password "admin".
The camera is registered successfully when the image appears. Now press
Camera Settings and select Change the password and assign a unique
password to the camera. This is required for secure use of your camera.
Note: Basically none of the routers in Europe support the SmartConfig option (at
the time of writing this user manual), which is why this option has no function.
3. TO MOUNT THE CAMERA ON A FIXED SPOT.
The camera may be placed on any horizontal surface.
Attention: Make sure the camera is already registered to the Wi-Fi network.
When the camera is installed and then connected to the mains, it'll re-establish
the connection with the network. Please first check whether a proper connection
can be established with your Wi-Fi router.
Underneath the foot of the camera you'll find a mounting panel for mounting the
camera. Rotate the panel anti-clockwise to remove the mounting panel. Make
sure to properly fix the mounting panel onto the wall with the screws to ensure
that the camera is pointing in the right direction. After mounting the camera, it can
no longer be rotated on its foot. However, you can still increase of decrease the
camera's height. The camera is replaced on the foot with a rotating movement.