Levo Lux Mode D'emploi page 21

DRY & ACTIVATE
INSTRUCTIONS
6. If needed, you can pause anytime during the
cycle by pressing the LOCK button located
below the lid to release the latch or by
pressing the START/PAUSE icon, pausing your
infusion. Close the lid until you hear the latch
"click" then press the START/PAUSE button to
continue your DRY or ACTIVATE cycle.
7. Your LĒVO Lux will display WARMING UP as it
preheats to your desired temperature and then
alert you with a sound when the preset
temperature has been reached. During the
cycle, the display will show REMAINING TIME
and CURRENT TEMPERATURE.
NOTE: You can change time and temperature
or manually end your cycle at any time.
8. You'll receive an alert when the timer is up
and your cycle is complete. The display will
read DRYING/ACTIVATING COMPLETE.
9. Having dried and/or activated your
botanical ingredients, now is a great time to
infuse. Check out INFUSION INSTRUCTIONS
on page 10.
Take careful precaution only to use
the DRY/ACTIVATE cycles for treating
your botanicals – free of any oil,
butter or liquids.
16