Levo Lux Mode D'emploi page 14

09
GETTING STARTED
7. Place the silicone stirrer on the center
mark inside the reservoir.
8. Place the Herb Pod inside the reservoir
(beside PLACE POD HERE guideline). Make
sure you have placed your Pod Protector
inside, flat against the bottom of your pod
and cover on top if you will be using the DRY
or ACTIVATE cycles.
9. Select either DRY, ACTIVATE, or INFUSE.
10. Set your temperature reading to display in
either Celsius or Fahrenheit. Toggle between
Celsius and Fahrenheit by holding down the
temperature + and - buttons simultaneously
for two seconds.
This comfy cushion keeps heat delivered evenly
and protects your botanicals during Dry and
Activate cycles. It's safe to use to Infuse, too.
Be sure to place the pod cover on top.