Vasco RF REMOTE CONTROL Manuel D'utilisation Et D'installation page 21

RF pairing cancellation:
a. RF reciever
Press longer than 10 seconds the
b. Blower:
Via the blower:
Put the blower in frost protection
mode and press simultaneous
on the button
mode
on the blower for more than
5 seconds.
5 sec.
When the RF remote control and the blower are not linked anymore, the
symbol disappears on both the LCD screens.
ERROR CODES ON DISPLAY
- Er1: Room temperature sensor defective (interrupted sensor)
- Er2: Room temperature sensor defective (sensor shorted)
- Er3: Blower internal temperature sensor defective (interrupted sensor)
- Er4: Blower internal temperature sensor defective (sensor shorted)
- ErE: Error in electronics
10 sec.
Via the RF remote control:
Put the RF remote control in
frost protection mode and press
simultaneous on the button
and
and
5 seconds.
button of the RF reciever.
10 sec.
for more then
5 sec.
EN
mode
21