Installing Batteries - Vasco RF REMOTE CONTROL Manuel D'utilisation Et D'installation

INSTALLING BATTERIES

Remove the battery
cover which is
placed on the front
of the
RF remote control.
MOUNTING THE RF REMOTE CONTROL
Unscrew the 2 screws
under the RF remote control.
18
Insert the 2 AA batteries supplied.
Note the correct polarity
according to the engraving on the
RF remote control when inserting
the batteries.
On the wall
x2
Secure the wall plate with the two
screws provided using the horizontal
and vertical holes.
On the table stand
Insert the 2 pins
inside the wall plate.
Slide the stand
to the right.
Replace
the battery
cover.