Vasco RF REMOTE CONTROL Manuel D'utilisation Et D'installation page 20

2.
Put the RF remote control in frost protection mode: press 3x
on the button
The RF remote control is in frost protection if this symbol is
visible on your screen:
3.
To ensure correct operation of the radiator, the power of the
radiator must be adjusted via the RF remote control. This step is
(only) automatically addressed during the linking process, for
controls that deliberately could not be programmed during the
production process.
The power is set to 500W by default.
Use the
power (see rating plate radiator).
Don´t know the output of your radiator?
Contact your installer.
4.
When the RF remote control and the
blower are linked, the
appears on the LCD screen.
20
then press
mode
5 sec.
and keys to set the
symbol
for 5 sec.
OK