Ellrona VC11 Mode D'emploi Original page 33

15 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
15.1 Complete overview
A Indicator lamp (for seal) For indicate the seal process.
B Seal only (Schweißen) For sealing the bag without vacuum.
C Cancel (Abbruch) For switch off the vacuuming and sealing action whenever the
operator wants to stop the operation.
D Vacuum/Seal (Vakuum) For draw air out of the bag and automatically change
operation to seal the bag after vacuum is completed.
E Indicator lamp (for vacuum) For indicate the vacuum process.
F Cover-lock To lock the cover. On the left side and right side of the cover there is
a key-press.
G Cover-unlock Press to unlock the cover.
If you open the cover, you see the
Sealing strip: Contains a heating wire covered with Teflon which allows the bag to
seal but not to stick to the strip.
Warning
Please observe the following safety notices in order not to burn or scald yourself or
others.
► To avoid getting burned, never touch the sealing bar while the unit is operating.
Ellrona Vakuumierer VC11 33