ION Video 2 PC HD Guide D'utilisation Rapide page 4

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Windows
1.
Insert the CD into your computer's CD drive.
2.
Install the drivers.
On the window that appears after you insert the CD, click "Install  Driver." Follow the on-screen
instructions that appear to complete the installation.
If this window does not automatically appear, double-click "My Computer" then double-click the CD. The
window should appear. (If the window still does not appear, right-click the CD and select "Explore."
Once the CD's contents are shown, double-click the "PC" folder, double-click the "Drivers" folder, then
double-click "Setup.exe.")
3.
Install the software.
On the window that appears after you insert the CD, click "Install  Software." Follow the on-screen
instructions that appear to complete the installation.
If this window does not automatically appear, double-click "My Computer" then double-click the CD. The
window should appear. If the window still does not appear, right-click the CD and select "Explore." Once
the CD's contents are shown, double-click the "PC" folder, double-click the "Software" folder, double-
click the "Cyberlink..." folder, then double-click "Setup.exe."
You can eject the CD and begin using Video 2 PC HD and the software you installed.
4.
Connect the device.
Connect Video 2 PC HD to a free USB 2.0 port on your computer. (We recommend connecting it to a port
on the rear panel of your computer.)
You may see several dialog boxes in the corner of the screen, indicating the computer has detected Video
2 PC HD is connected. In some cases, you may see a message resembling an error message – this is
normal. Click "OK" (if necessary).
5.
Begin!
You can find the software by going to Start Menu  All
Programs  Cyberlink PowerDirector. (You may also
double-click the shortcut icon on your computer's
Desktop.)
The first time you open PowerDirector, you will be asked
to enter a serial number. Find the number on the sleeve
of the CD and enter it.
4
Note: Sometimes, the software will
ask if you want to upgrade after you
open it. This is optional but not
required.