Adding Data; Maintenance And Storage - senya XY-5002 Notice D'utilisation

screen:

When the indicated weight remains constant for 1 minute, the appliance will automatically switch off.
Nutritional value indicator:

Place the food item to be weighed onto the scale.

Refer to the code list, provided in chapter 2 of this manual, to find the nutritional code which corresponds to
your food item.

Enter the nutritional code which corresponds to your food item by pressing the number keys 1 to 9 on the
scale's keypad.

The nutritional values of the food item will be displayed on the screen in the 'FOOD CODE' section.

To erase data and select a new nutritional code, press the 'CLR/MC' key. Data will then be reset to zero on
the screen.

Adding data:


You can record and add the nutritional values of several food items using the data storage function. To do
this:

Enter the code using the keypad, then press M+. 'M01' will appear in the top left-hand corner of the screen
to indicate that the first food item's data has been recorded.

Press 'CLR/MC' to enter a new code using the keypad.

Enter the second code using the keypad, then press M+. 'M02' will appear to indicate that the second food
item's data has been recorded.

Repeat this as often as necessary.

To view the total amount of nutritional values, press the 'MR' key once: the ' ' symbol will appear in the
top left-hand corner of the screen. The displayed values correspond to the total amount of recorded values.

Press 'MR' a second time to return to the previous display.

To erase recorded values, press the 'CLR/MC' key twice: the letter 'M' will begin to flash. Press the 'CLR/MC'
key a third time: the letter 'M' and the total number of registered codes will be erased. This indicates that all
previously recorded values have been erased.
NB:

The scale's recorded nutritional values for finished and blended products may differ from those indicated by
the manufacturer on the packaging of the finished product.

Change the battery when the 'LO' indicator appears on the screen, see below:

4. Maintenance and storage


The maximum weight of the scale is 5000 g, which included the weight before tare.

To ensure the life of the scale, do not put the scale under wet, hot & cold condition.

It is recommended to take out batteries if the unit is not used for a long time.

The scale is a high precision electronic weighing product, please do not press or drop the scale otherwise it is
easy to be damaged.

If the scale surface is dirty, please clean the scale with soft cloth, do not use any chemical detergent and
allow water to get inside the scale.

The product is for small goods weighing only, do not use for legal trade.

If the result appears improperly, please check whether the batteries and the touching point contact well.
Replace for new batteries if used for a long time already, and then try again. If necessary, contact your local
distributor or the manufacturer.
32