Publicité
Les langues disponibles
Les langues disponibles
Never let your appliance operating without supervision.
Always operate with dry hands.
Operating never move or tilt your appliance.
OPERATING INSTRUCTIONS
Remove all protective foils and packaging material prior to usage.
Place the appliance on a flat, solid, and heat-resistant surface, on its vertical position. Never install your
appliance on inflammable surface.
Do not install the appliance near open fireplaces or all hot sources.
Clean carefully the appliance and accessories. Don't use abrasive products.
Connect the appliance directly to a wall plug socket. The use of adaptors, multiple sockets and/or extensions
is not recommended.
To properly service the fryer and to secure it 10 cm of clearance is needed on all sides of the fryer.
Before pouring oil in the tank check there is no water in it. Fill the tank with the required volume of oil.
Maximum and minimum oil level markers. These levels must be respected.
We recommend using a good quality oil to preserve your appliance. Vegetal oil contents less saturated
grease. (If solid grease is used, always pre-melt it before adding it to the fry pot.
Electric connexion: installation of this unit should be performed only by a qualified service technician and in
accordance with the actual text regarding accident prevention. All wiring connections for this appliance must
be made in accordance with the wiring diagrams furnished on the appliance. To avoid electrical shock, this
fryer must be adequately and safely grounded (earthed). If the appliance is wired directly into the electrical
power supply a mean for disconnection from the supply giving a contact separation of at least 3mm in all poles
must be incorporated in the fixed wiring. This appliance must be positioned so that the plug is accessible
unless other means for disconnection from the power supply is provided.
Oil must be changed regularly. Once cooling down, discard used frying oil, use appropriate container in order
to be recycled following the rule for the protection of the public health and the environment, store in a tank in
order to be recycled.
Before pouring oil check the appliance is off. Once filled with oil to the proper level, you can move the
power switch to the on position. Then the green indicator light in green. Adjust the thermostat on the chosen
temperature. The green light turns off when the chosen temperature is reached. Once your product is fried,
lift the basket from oil, shake it to remove exceed oil. Never close the lid when oil is hot, wait for it cool down.
ADVICE
Your appliance is provided with an overheating protection. When this protection has been activated you must
let your appliance cool down.
If overheating protection is stated regularly, contact your dealer or our after-sales service.
To reset the appliance, press the reset button located on the back side of the appliance.
6. CLEANING AND MAINTENANCE
6.1 Safety instructions
Before servicing (clean, maintenance, repair) unplug the appliance
Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your appliance.
Check regularly the power cord.
Never dip your appliance in liquid.
WARNING
Not direct washing via water jets. (Neither jet under pressure)
Publicité
