Replacing Belt - Panasonic MC-CG985 Manuel D'utilisation

Motor Shaft
Arbre du moteur
Eje del transmissión
del motor
Agitator Assembly
Assemblage de l'agitateur
Montaje del agitador
Tabs
Languettes
Pestaña
Agitator Cover
Couvercle de l'agitateur
Cubierta del agitador
Base
Cover
Base
Couvercle
Base
Cubierta

Replacing Belt

➢ ➢ Install new belt in belt groove on
the agitator assembly, then over
the motor shaft.
➢ ➢ Place agitator assembly back into
POWER NOZZLE.
➢ ➢ Replace agitator cover.
➢ ➢ Line up front of cover and base.
➢ ➢ Rest cover on front edge of base as
shown.
➢ ➢ Tilt cover to back.
➢ ➢ Press cover firmly until tabs snap
into place.
➢ ➢ Replace cover screws.
- 50 -