Electronic Touch Control - Panasonic MC-CG985 Manuel D'utilisation

Electronic Touch Control

MEDIUM
POWER CONTROL
LOW
BARE FLOOR
CARPET
HIGH
OFF
➢ ➢ Select an Electronic Touch Control
position on the handle depending on
the type of vacuuming you will be
doing:
➢ ➢ CARPET HIGH - turns on both the
canister and the POWER NOZZLE
motors for HIGH power and cleaning of
most carpets.
➢ ➢ In order to get MEDIUM or LOW power
level for carpet cleaning, you must
press CARPET HIGH button first, then
press the desired lower power level.
➢ ➢ BARE FLOOR - turns on the canister
motor only for HIGH power and
cleaning of bare floors.
➢ ➢ Power Level MEDIUM - reduces the
power of the canister motor only to the
MEDIUM level for attachment cleaning
of upholstery.
➢ ➢ Power Level LOW - reduces the power
of the canister motor only to the LOW
level for attachment cleaning of
curtains, blinds, etc.
➢ ➢ OFF - turns off canister and POWER
NOZZLE motors
NOTE - When the BARE FLOOR button is
pressed, the headlight, wand light and dirt
sensor DO NOT function since no electric-
ity flows to the POWER NOZZLE
- 22 -