Publicité
Les langues disponibles
Les langues disponibles
Basic operations
1
Source lamps
1
4
7
10
1
Turn on the power
Press
STANDBY/ON (or
remote control).
The standby lamp goes off and the source lamp of the current
source lights in red.
Current source name appears.
ANALOG
AUTO SURR
L
R
S.WFR
To turn off the power (into standby)
Press
STANDBY/ON (or
again.
The standby lamp lights in red.
NOTES
• A small amount of power is consumed in standby mode. To turn
the power off completely, unplug the AC power cord.
• Turning a source component on before turning the receiver on
may cause a noise or interrupt the sound and picture. In this
case, turn both the source component and the receiver off, then
turn the receiver on before turning the source component on.
2
2
2
3
1
2
3
2
3
5
6
8
9
0
10
AUDIO on the
TUNED STEREO AUTO MUTING
MHz
AUDIO on the remote control)
2
Select the source to play
On the front panel:
Turn SOURCE SELECTOR until the source name
you want appears on the display.
The source lamp corresponding to the selected source lights in
red.
• As you turn SOURCE SELECTOR, the source changes as
follows:
ANALOG
AUTO SURR
TUNED STEREO AUTO MUTING
L
R
S.WFR
DVR/DVD
VCR
USB WIRELESS
FM
AM
AUX
(Back to the beginning)
DVR/DVD:
Select this for the DVD recorder or DVD
player.
VCR:
Select this for the VCR.
DBS:
Select this for the DBS tuner.
TV:
Select this for the TV.
USB WIRELESS:
Select this for the PC component using
a wireless equipment.
USB TERMINAL:
Select this for the PC component.
FM:
Select this for an FM broadcast.
AM:
Select this for an AM broadcast.
AUX:
Select this for the component connected
to the AUX jacks on the front panel
(inside the front door).
From the remote control:
Press one of the source selecting buttons.
• For "USB WIRELESS" and "USB TERMINAL," press USB. Each
time you press USB, the mode alternates between "USB
WIRELESS" and "USB TERMINAL."
MHz
DBS
TV
USB TERMINAL
19
Publicité
