Fuel selector
on rear wall
1. furnace chamber door
2. Furnace chamber walling
3. ash bin
4. primary air regulator
5. fuel storage
6. smoke tube end
7. door knob
8. Model plate on the rear wall
9. Outside air intake
1.2 Installation
Fuels
Low smoke, trouble-free operation of the stove and a supply of heat at the nominal
level with a chimney draught of 12 Pa are only guaranteed when you use the following
fuels and no others.
Only use natural, dry chopped firewood with a remaining humidity of max. 20%, and
lignite (brown coal) briquettes.
Brown-coal
Hard wood
Soft wood
With the primary air damper, do you adjust the rated output.
There may be engaged in only the settings and fuel quantities are
given that correspond to your licensed or purchased device
Types of fuels
Heating value appr.
kWh/kg
5,3 – 5,5
4,0 – 4,2
4,3 – 4,5
26
.