Publicité
Les langues disponibles
Les langues disponibles
Clean surfaces with soap and water, alcohol, non-abrasive
detergents or chlorine or soda-based substances (chlorine
water, muriatic acid). Never use abrasives, steel wool or
similar products as they could damage the paint, coating
or body of the machine. For cleaning, use non-toxic and
hygienic products.
5.2. OPERATIONS IN THE CASE OF FAILURES
When the white light on the panel is on but the machine does not start, check that the lever and cover are closed.
This prevents the machine from starting when all the safety microswitches are not activated. In the event of a
fault, disconnect the main wall switch and notify the maintenance service or specialist personnel. Do not start or
tamper with the equipment yourself.
5.3. MACHINE IDLE FOR A LONG TIME
If the machine is idle for a long time, disconnect the main wall switch and clean the machine and its accessories
thoroughly. Use white vaseline oil (or similar products) to protect all parts of the machine. These products,
consisting mainly of oily substances and detergents, which are now available in spray cans for easy application,
not only give the aluminium alloy of the magnetism a shiny appearance, but also prevent moisture and dirt from
penetrating into the interior of the machine and thus its corrosion. We recommend covering the machine with a
nylon cloth (or similar).
ILLUSTRATIONS
110V
220V
12
Publicité
