8.5
Recommended fuel quality
Using fuel which does not comply with the following specifications exposes the equipment to irreversible damage not covered under
warranty:
-
Cleanliness and quality: ensure that the petrol used does not contain water and that it is fresh and clean (not out of date or
contaminated). For the
-
Octane rating: minimum octane rating of 87 (R+M)/2 or minimum octane rating of 90 (RON = Research Octane Number)
-
Blends: the use of unleaded petrol containing up to 10% ethyl alcohol is authorised (France: SP95-E10). It is not permitted
to use unleaded petrol containing less than 90% petrol, e.g. E15, E20 or E85. Blends of methyl tert-butyl ether (MTBE) and
unleaded petrol are approved (up to a maximum of 15% MTBE by volume).
However, it is strongly recommended that the same type of fuel is used throughout the complete service life of the unit. If the unit is
used infrequently (less than once a month), use new fuel with each use or add a stabilizing additive to the fuel tank.
8.6
EU Declaration of Conformity
We, SDMO Industries - 270 rue de Kerervern, 29490 GUIPAVAS/CS 40047, 29801 BREST CEDEX 9 – France, hereby declare
under our sole responsibility that the following generating sets:
Equipment
Make:
description:
Generating set
KOHLER-SDMO
1. Comply with the safety requirements set out in the Low Voltage Directive - 2014/35/EU of 26 February 2014 in application of the
harmonized standard EN 60204-1: 2006 (AMD 1 2006, COR 2010)
2. Comply with the provisions of the following Directives:
-
Machinery - 2006/42/EC of 17th May 2006 in application of the harmonized standard EN 8528:-13 2016
-
Electromagnetic compatibility - 2014/30/EU of 26th February 2014 in application of the harmonized standards EN 60034-1:
2010 (COR 2010) / EN 61000-6-1: 2007 / EN 61000-6-2: 2005 (COR 2005) / EN 61000-6-3: 2007 (AMD1 2011,
AMD1/COR 12) / EN 55011: 2009 (AMD 1 2010)
-
Relating to the restriction of the use of certain hazardous substances in electrical and electronic equipment - 2011/65/EU of
8th June 2011 in application of the harmonized standard EN IEC 63000 : 2018.
-
Relating to noise emission in the environment by equipment for use outdoors- 2000/14/EC of 8 May 2000, via the
compliance procedure set out in Annex VI:
Notified body:
Trade name:
HX 3000 C5
HX 3000 C5 RCD
HX 4000 C5
CETIM - BP
HX 4000 C5 RCD
67- F60304 –
SENLIS -
HX 6000 C5
FRANCE
HX 6000 C5 RCD
HX 7500 T C5
HX 7500 T C5 RCD
Name and address of the person authorized to create and hold the technical file:
L. ANDRIEUX, 270 rue de Kerervern, 29490 GUIPAVAS / CS 40047, 29801 BREST CEDEX 9 – France.
1134_EN.docx
Trade name:
HX 3000 C5
HX 3000 C5 RCD
HX 4000 C5
HX 4000 C5 RCD
HX 6000 C5
HX 6000 C5 RCD
HX 7500 T C5
HX 7500 T C5 RCD
Measured sound
Type:
power level:
3499231003916
94,59 dB(A)
3499231920428
94,59 dB(A)
3499231003947
95,08 dB(A)
3499231920435
95,08 dB(A)
3499231003978
96,72 dB(A)
3499231920442
96,72 dB(A)
3499231004098
96,72 dB(A)
3499231920459
96,72 dB(A)
24/198
Type:
3499231003916
3499231920428
3499231003947
3499231920435
25-2021-00000000-000
3499231003978
52-2026-99999999-999
3499231920442
3499231004098
3499231920459
Guaranteed sound
power level (LwA):
95 dB(A)
95 dB(A)
95 dB(A)
95 dB(A)
97 dB(A)
97 dB(A)
97 dB(A)
97 dB(A)
GUIPAVAS, 07/2021
L. ANDRIEUX
President, SDMO Industries
Serial numbers:
Rated output:
2400 W
2400 W
3200 W
3200 W
4800 W
4800 W
4800 W
4800 W
2021-07-14