Publicité
Les langues disponibles
Les langues disponibles
Figure 21
User interface
display
Display icons:
"ON/OFF" icon : used for turning the appli-
ance on and off.
"MENU" icon : used to access optional func-
tions in the user interface.
"LIGHT" icon: used to turn the interior light
on and off, glass door models only.
"Clock" icon : used to enter the Delay start/
vacation mode.
"LOCK" icon : used to lock out functions in
the user interface.
Display area text:
Signifies the appliance is on and producing
ICE
ice.
Signifies the appliance is in economical ice
ECO
production mode.
Signifies the appliance is off
OFF
Signifies a door ajar alarm condition.
DOOR
Cleaning is recommended or the appliance
CLEAN
is in the clean mode.
USING YOUR ELECTRONIC CONTROL
On/off
Menu
ICE
OFF
Display area
DOOR
ECO
1 4 6 8
hours
days
CLEAN
Delay start/Vacation mode:
1
hours
days
Hours or days timer is set for
Hours or days will be lit
When lit, this signifies the delay start/vacation mode is opera-
tional.
NOTE
The control display is covered with a clear plastic protec-
tive film. This film may be removed by carefully lifting at a
corner.
Starting your clear ice machine:
Plug the ice machine into a 115 volt wall outlet,
(see page 5 for electrical information). Your appli-
ance is shipped from the factory in the "ICE" mode and will
begin start-up of ice production after the start-up routine.
Upon applying power to the unit, or after a power interrup-
tion, the Ice machine will perform a self-test, followed by a
harvest cycle to clear any in-process ice production. This
start-up routine, ("after power is applied to the unit"), takes
approximately 13 minutes to complete before an ice pro-
duction cycle starts.
If the appliance does not start, confirm the wall outlet has
power, and the control is in the "ICE" mode, (see Options
section below). Do not initially start the ice machine in
"ECO" mode. "ECO" mode should only be used after there
is a full bin of ice.
13
Light
Delay timer
Lock
4
6
8
ICE
Publicité
