Chauvet Professional onAir IP Panel Min Manuel De Référence page 3

What is Included
• onAir IP Panel Min
• Seetronic Powerkon IP65 cable
• DMX mini XLR adapter
AC Power
This product has an auto-ranging external power supply that can work with an input voltage range of 100–240 VAC, 50/60
Hz and converts it to a 28 V DC, 50 W, 3-pin IP65 XLR output.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
Installing the Power Supply
The power supply attaches to the onAir IP Panel Min with a retaining pin.
1. Align the power supply so the loop on the back of the product and the loop on the power supply line up and fit into
each other.
2. Press and hold the latch button down on the retaining pin and insert it through the sets of loops on the product
and power supply.
3. Release the latch button.
DC Power
This product has a 3-pin IP65 XLR power input port that can work with an input voltage of 28 V DC, 50 W.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Signal Connection
The onAir IP Panel Min will work with a controller or controller software using a 5-pin DMX or wireless Lumenradio
CRMX™ connection. See the User Manual for information about how to connect and configure the product for these
signals.
Control Personalities
The onAir IP Panel Min
15Ch
, XYBasic(6), and XYExtended(10).
DMX Connection
The onAir IP Panel Min will work with a DMX controller using a 5-pin serial DMX connection or a wireless CRMX™
connection. A DMX Primer is available from www.chauvetprofessional.com.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along an existing DMX connection. Check the DMX controller's User Manual or with the manufacturer as not all DMX
controllers have this capability. The onAir IP Panel Min supports RDM protocol that allows feedback to make changes to
menu map options. Download the User Manual from
onAir IP Panel Min QRG Rev. 6
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
uses
CRMX™ for its control personalities:
• Ball-head mount
• Baby pin receiver
• Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
1Ch 3Ch
,
www.chauvetprofessional.com
Screw Color
Yellow/Brass
Latch button
4Ch 5Ch 6Ch 8Ch
, , , ,
for more details.
EN
Silver
Green
10Ch 11Ch
, , ,
2