Publicité
Les langues disponibles
Les langues disponibles
man_S20xx.qxd
12-03-2009
Cooling/dry operation
NOTE!
• Even if you press the ON button right after the operation stop, the air conditioner will not
start operation for approx. 3 min. in order to protect the compressor. The operation will start
automatically after 3 min. of waiting.
• If the unit operates cooling and dry for a long time in high humidity (i.e., windows and doors
are opened), dew and water droplets may form on the indoor unit.
• Use dry mode when both indoor and outdoor temperatures are 16°C and above. The dry
operation may stop under the low temperature.
• In dry mode the set temperature may not be attained depending on the number of occupants,
room condition, and outdoor temperature, because dehumidification is given priority.
• Temporary vapor from condensation on the heat exchanger may form a mist at the start of dry
operation or at the change from cooling operation.
Heating Operation
4
30
12:32
Pagina 30
1.
Press the ON/OFF button
2.
Set the operation mode to Cooling
operation mode button
3.
Adjust the setting temperature by pressing the temperature setting buttons.
4.
Adjust the fan speed by pressing the fan speed button. When the mode is set
at "AUTO" the fan speed changes automatically.
5.
Press the ON/OFF button again. The system will retain the previous setting
conditions until next operation.
1.
Press the ON/OFF button
2.
Set the operation mode to Heating
3.
Adjust the setting temperature by pressing the temperature setting buttons.
Temperature setting range:16~30°C by 1°C step.
4.
Adjust the fan speed by pressing the fan speed button. When the MODE is
set at "AUTO", the fan speed changes automatically.
5.
Press the ON/OFF button again.The system will retain the previous setting
conditions until next operation.
, Heating
or Dry
, by pressing the
, by pressing the operation mode button.
Publicité
