Télécharger Imprimer la page

Alecto COA3920 Mode D'emploi page 39

Publicité

Les langues disponibles

Les langues disponibles

AVOID THE FOLLOWING PLACES FOR INSTALLATION:
Do not install the CO-detector in the turbulent air created by ceiling fans.
Do not install the CO-detector near vents with fresh air.
Do not install the CO-detector near doors and windows leading outdoors.
Do not install the CO-detector near extremely dusty, dirty or greasy spaces such as heating spaces <4m³ or
pantries. Dust, grease and household chemicals can affect the sensor.
Install the CO detector at least 0.5 meters away from gas discharge lamps (halogen) because of electronic
interferences that can lead to false alarms.
Do not install the CO detector in humid and wet spaces, such as the bathroom.
Do not install the CO detector in a location where the temperature is lower than -10°C or warmer than +45°C.
Do not install the CO detector in a place where the humidity is higher than 93%RH.
Never install the CO detector behind curtains or furniture. Carbon monoxide must be able to reach the sensor
to ensure the sensor can properly detect carbon monoxide levels.
Never install the CO detector flat on a table or similar surface.
Never install the CO detector in spaces where spray cans may be used (hair spray, deodorant)
Not behind
a closet
Not behind
a curtain
39
Not near an
air vent

Publicité

loading