Philips HI5900 Série Mode D'emploi page 7

Problem
Water droplets comes
out of the soleplate.
Dirty water and
impurities (brown stains,
white flakes, etc.) come
out of the soleplate.
Water flushes out of the
soleplate.
Possible cause
After the Calc-Clean process
remaining water may drip
out of the soleplate.
Impurities or chemicals
present in the water have
deposited in the steam
vents and/or soleplate.
You have accidentally
started the Calc-
Clean process (see
chapter 'Cleaning and
maintenance').
Solution
Wipe the soleplate dry with a piece of cloth.
If the Calc-Clean light still flashes and the
appliance still beeps, perform the Calc-
Clean process (see chapter 'Cleaning and
maintenance').
Performs the Calc-Clean process regularly
(see chapter 'Cleaning and maintenance').
Switch off the appliance. Then switch it
back on again. Let the iron heat up until the
'iron ready' light lights up steadily.
English 9