Repair
4.2 Replacing flat hinge
Required tools:
Torx Bit TX20
6,3 mm (1/4")
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶
Appliance door removal operation should only be carried out by
trained specialists.
▶
To move the appliance, two people are required.
▶
Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶
Wear protective gloves.
Caution
Open hinge area!
Finger crushing / entrapment
▶
Do not reach into the hinge area.
▶
Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶
Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Furniture door is removed. See Installation Instruction.
Door is open.
2021-03-10_9001628795
4.2.1 Removing flat hinge
[00340865]
1. Remove two hinge covers.
Copyright by BSH Hausgeräte GmbH
Take care that hinges do not close during removal / installation.
Page 110 of 481