Publicité
Les langues disponibles
Les langues disponibles
CHAP. 1. CONTENT ORGANIZATION AND CONSULTATION MODALITY
MANUAL PURPOSE
MANUAL IMPORTANCE
The present instruction manual for the use is to be considered as integral part of the machine:
1.
Must be kept for all the machine life.
2.
Must be coupled with the machine in case of its ceasing.
3.
Besides to show all useful notices for the operators, contains (collected in specific chapters) the electric diagrams that
will be used for the possible maintenance interventions and reparation.
Besides the present manual has been written with the purpose to supply indications and warnings to know the supplied
machine, to understand its principles and functioning limits. For possible doubts you can call the Authorized Assistance
Center.
RESPONSABILITY
➢
If the present manual endures damages or is lost, it is possible to request a copy to the Authorized Assistance Center.
➢
The present manual reflects the technical state during the machine manufacturing; the manufacturer reserves the right to
update the production and of consequence other manual issues, without the obligation to update productions or previous
manuals, if not in particular cases regarding the health and the people safety.
Pay particularly attention to the residual risks content present on the machine and the prescriptions to which the
➢
operators must keep.
The manufacturer is the responsible for the machine in its original configuration.
➢
➢
The manufacturer isn't the responsible for damages caused from the improper use or not correct of the machine and
documentation or for damages caused from the imperative standards violation, negligence, lack of experience,
imprudence and the not respect of regulation standards on behalf of the employer, of the operator or the maintenance
man and for every possible damage, caused from an irrational, improper and/or wrong use.
The manufacturer isn't the responsible for the consequences caused from the not original spare parts use or of equal
➢
characteristics.
The manufacturer is the responsible only for the information showed in the manual original version in Italian language.
➢
The prescriptions non-fulfillment contained in this manual will cause the guarantee immediate decay.
➢
The factory responsibles, that supervision to the working activities, in the field of the foreseen respective attributions and
competence, must:
Carry out the foreseen safety measures;
➢
Make informed the operators about the specific risks whom are exposed and bring to their knowledge the prevention
➢
essential standards;
Prepare and require that the single operators observe the safety standards and use the protection means put at their
➢
disposal;
Work an operator, contemporary, on this product.
➢
CHAP. 2. GENERAL INFORMATION AND CHARACTERISTICS
GENERAL INFORMATION AND CHARACTERISTICS
Meat mincer designed to be used with plate holes diameter smaller or equal to 8mm.
The mincer – grater, here follow is called "machine", è designed for:
1.
With the grinding group placed from a side, to mince, reduce of size fresh meat not frozen, through cutting tools to
obtain meat sauce, hamburgers, meatballs and sausages. The meat must be without bones, or other parts of different
consistency from the meat.
2.
With the grater group placed on the opposite side of the machine, to grater tough cheese, bread and biscuits.
In the grinding group, the machine is constituted from an electric motor inserted in a unique merger (basic machine body).
The meat to grind, is loaded manually in the load hopper, placed in the superior zone of the machine and always manually and
with the pestle help is introduced in the grinding neck towards the Archimedean screw.
The hopper is blocked to the machine neck. The pestle is of plastic material suitable for the contact with food products.
The grinding group is of Enterprise type it comes with 6mm plate holes diameter.
The plate in turn is pressed against the cutter from the wheel inserted on the grinding group mouth.
The grinding group is dismanteable; all direct contact materials with the food material are in conformance with the actual
hygienic standards for food.
In the grinding group, the motor used for the grater rotation is the same used in the grinding group.
The product to grate is loaded manually inside the grater mouth placed in the machine superior zone, and always manually,
acting the pressure with its handle, the product is driven against the grater roll.
The product load must happen in moderate quantity to avoid that lowing the pressure the machine doesn't start, due to the
safety micro switch placed in the pressure block.
The grater roll, which can be stamped, cannot be removed from the machine.
ORIGINAL INSTRUCTIONS TRANSLATION
Pag.
di
3
13
Publicité
