Thorough Cleaning; Storage Case - Cembre B-FC470 Notice D'utilisation Et Entretien

2.8) Using the battery charger
Carefully follow the instructions in the battery charger user manual.
3. MAINTENANCE
The tool is robust, completely sealed, and requires very little daily maintenance. Compliance with
the following points, should help to maintain its optimum performance:

3.1) Thorough cleaning

Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any residue,
especially close to pivots and moveable parts.
Do not use hydrocarbons to clean the rubber parts.

3.2) Storage case

When not in use, the tool should be stored and transported in the steel case, to prevent damage.
The case, type VAL-FC470, is suitable for storing the tool and the accessories.
VAL-FC470: Size 559x459x131 mm (22x18.1x5.2 inches), Weight 6,7 kg (14.7 lbs).
4. CONNECTION TO COMPUTER
The memory card integrated in the tool records operating data from 200.000 cycles for transfer via
the USB cable supplied.
www.cembre.com
To view and manage this data, go to and register in the dedicated area, then
Cembre
CEM_SWBT01
download the free software .
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
5. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website..
10