Bosch KGN36HI32 Notice D'utilisation page 41

o
Home Connect
T his appliance is Wi-Fi-capable and can
H o m e C o n n e c t
be remotely controlled using a mobile
device.
Wi-Fi is a registered trademark of
Note:
the Wi-Fi Alliance.
In the following cases, the appliance
functions like a refrigerator without a
network connection and can still be
manually operated via the controls:
The appliance is not connected to a
■
home network.
Home Connect service is not
■
available in the country in which the
appliance is set up. For an overview
of the countries in which Home
Connect is available, see
www.home-connect.com.
Please observe the safety
Note:
information in this instruction manual.
Ensure that this is also observed if you
operate the appliance via the Home
Connect app and are not at home when
doing so.
~ "Safety instructions" on page 30
Follow the instructions in the Home
Connect app as well.
Setting up Home Connect
Notes
Observe the Home Connect
■
supplementary sheet, which is
available for download under
http://www.bosch-home.com with
the instructions. To do so, enter the
E-number of your appliance in the
search field.
After switching on the appliance,
■
wait at least two minutes until
internal device initialisation is
complete. Only then start setting up
Home Connect.
To implement settings with Home
■
Connect, the Home Connect app
must be installed on your mobile
device.
Observe the supplied Home
Connect documents for this.
Follow the steps specified by the
app to implement the settings.
The Home Connect menu will close
■
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on
how to open the Home Connect
menu at the start of the appropriate
sections.
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, the refrigerator can be
automatically connected to the home
network.
Press alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Keep pressing + button refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows AC and the freezer
compartment temperature display
shows OF.
Press + button freezer compartment.
3.
The appliance is ready for automatic
connection.
Wi-Fi connection display flashes.
The freezer compartment
temperature display shows an
animation for 2 minutes.
The appliance is ready for automatic
connection for as long as the
animation is displayed.
Within those 2 minutes activate the
4.
WPS function on the home network
router (e.g. using
WPS/WLAN button. Observe the
information on this topic in the router
documentation).
Home Connect en
41