Mitsubishi Electric CITY MULTI Smart ME Controller Manuel D'installation page 18

(1) Setup menu
(a) Group setting
Refer to section 1 "Initial Settings" (2) "Setup screen".
(b) Interlocked LOSSNAY
Refer to section 1 "Initial Settings" (2) "Setup screen".
(c) Search connection information
Refer to section 1 "Initial Settings" (2) "Setup screen".
(d) Cool/Heat display
(f) Temperature sensor offset
* The temperature in the [Current room temp.] field
indicates the temperature measured by the built-in
temperature sensor on the remote controller.
** When the offset value is changed, it may take up to
1 minute until the change is reflected on
temperature display on the Home screen.
(h) Auto mode Single/Dual
(e) Override control
(g) Humidity sensor offset
* The humidity in the [Current humidity] field indicates
the humidity measured by the built-in humidity
sensor on the remote controller.
(i) Room name
(max. 16 characters)
– 18 –