English
Operation Control Panel
Power Control
The power control turns the unit on and off.
Warning Light
Condensed water may accumulate in the unit. If
the internal tank becomes full, the Warring Light
will shine and the unit will not operate until the
unit has been drained.
Mode Control
The Mode Control has three settings:
Cool
The settings are adjusted with Mode Control but-
ton. A light will indicate which setting is currently
being used.
Cool Mode
When cool mode is selected, the indicator light
will shine green. During the cooling mode the air
is cooled and hod air is exhausted to the outside
air through the exhaust tube. Adjust fan speed air
through the temperature to suit your desired com-
fort level.
Note: The air exchange hoses must vent outside
the room when using cool Mode.
Dehumidify Mode
When Dehumidify mode is selected, the indicator
light will shine orange. Air is dehumidified as it
passes through the unit, without being in full
cooling mode . The fan will operate in Medium
speed. Fan speed is not adjustable in Dehumidify
mode.
Fan Mode
When Fan mode is selected the indicator light will
shine yellow. Air is circulated throughout the
room with no cooling.
(6)
Dehumidify
Fan
Note: unit does not need to de vented in Fan
mode.
Fan Speed Control
The Fan Speed Control has 3 settings:
High
Medium
Timer Control
Auto turn off : With machine in fan mode,
press timer button to select number of hours you
would like the unit to run in air conditioning
mode until it automatically shuts off.
Auto turn on : With machine powered off ,
press timer button to select number of hours until
you would like the unit to automatically start
running in air conditioning mode
Timer / Timer set Controls
Used for adjusting the timer and thermostat. The
default display is room temperature. In cooling
mode, When " " or " " button is pressed, the set
temperature is displayed and may be adjusted.
After 15 seconds the display will revert back to
room temperature. Temperature is only
adjustable in Cool and Heat mode. The time is
adjustable between 1 and 12 hours.
Note: By pressing both Temp/Timer Set buttons
at the same time, the display will toggle
between Celsius and Fahrenheit.
Low