Beko BA 110 AC Manuel D'utilisation page 4

1 Safety precautions
Warning
To prevent death or injury to the user or other people and property
damage, the following instructions must be followed. Incorrect
operation due to ignoring of instructions may cause death, harm or
damage.
•Installation must be performed according to the installation
instructions. Improper installation can cause water leakage,
electrical shock, or fire.
•Use only the included accessories and parts, and specified tools for
the installation. Using non-standard parts can cause water leakage,
electrical shock, fire, and injury or property damage.
•Make sure that the outlet you are using is grounded and has the
appropriate voltage. The power cord is equipped with a three-prong
grounding plug to protect against shock. Voltage information can be
found on the nameplate of the unit.
•Your unit must be used in a properly grounded wall receptacle. If
the wall receptacle you intend to use is not adequately grounded or
protected by a time delay fuse or circuit breaker (the fuse or circuit
breaker needed is determined by the maximum current of the unit.
The maximum current is indicated on the nameplate located on
unit), have a qualified electrician install the proper receptacle.
•Install the unit on a flat, sturdy surface. Failure to do so could result
in damage or excessive noise and vibration.
•The unit must be kept free from obstruction to ensure proper
function and to mitigate safety hazards.
4 / 92 EN
Portable air conditioner / Instruction Manual